Stingray™
Self-deploying flood barrier activated by rising water
Flexible barrier that rises automatically when water enters its internal chambers. It makes it possible to quickly create a long line of protection without pre-filling with water or sand.
Heights
20, 30 or 48 in.
Deployment
90 ft in 20 minutes
Reusable
Yes
Where to use Stingray™?
- Garages
- Building entrances
- Perimeters
- Shores
- Construction site
- Small watercourses
- Industrial bays
- Roads
- Temporary cofferdams
In 4 steps
How it works
The barrier is rolled out on the ground, with the weighted edge facing the incoming water. Water enters the pocket-shaped chambers and gradually raises the barrier. As the water level rises, the increasing pressure stabilizes the system.
- 01 Expand
- 02 Capture
- 03 Rise up
- 04 Block
Technical specifications
Everything you need to know about
Stingray™
Dimensions and performance may vary depending on the configuration, custom dimensions, and project requirements.
| Specification | Details |
|---|---|
| System type | Flexible self-deploying flood barrier activated by rising water |
| Models / formats | Heights: 20, 30 or 48 in. Lengths: 15 or 30 ft Ground depth: 40 to 96 in.; weight: approximately 34.2 to 135.5 lb, depending on the model |
| Primary material | 21.5 oz / 610 GSM reinforced PVC composite mesh |
| Structure / design | 1000D, 20 × 20 weave, heat-bonded construction; weighted front edge and foam flotation strips |
| Product height | 20, 30 or 48 in. |
| Recommended protection height | Depending on the model height |
| Deployment time | Approximately 90 ft in 20 minutes |
| Recommended labour | 1 to 2 people |
| Fastening / connection | Industrial Velcro |
| Compatible surfaces / supports | Flexible barrier that conforms to the terrain |
| Configurations / accessories | 90° corner sections |
| Reusable | Yes |
| Maintenance / storage | Can be rolled or folded for storage; operating temperature from -32 °F to 158 °F |
