MAKO™
Inflatable Flood Barrier
Rigid inflatable barrier designed to quickly seal a door, window, corridor, or other opening. It is manufactured to fit the dimensions of the area being protected and requires no visible permanent structure.
Height
Up to approximately 48 in.
Installation
Approximately 5 minutes per section
Reusable
Yes
Where to use MAKO™?
- Residential doors
- Commercial doors
- Windows
- Corridors
- Garage entrances
- Industrial openings
- Culverts
- Critical infrastructure
In 4 steps
How it works
The barrier is placed in the opening and then inflated using a pump. The upper chamber presses against the sides of the opening, while the lower chamber applies downward pressure to create a watertight seal.
- 01 Position
- 02 Inflate
- 03 Compress
- 04 Block
Technical specifications
Everything you need to know about
MAKO™
Dimensions and performance may vary depending on the configuration, custom dimensions, and project requirements.
| Specification | Details |
|---|---|
| System type | Custom-Made Inflatable Flood Barrier |
| Models / formats | Standard widths: 24 to 108 in.; custom widths up to approximately 192 in. Thickness: 4 or 6 in., depending on the width |
| Primary material | Reinforced PVC with drop-stitch technology |
| Structure / design | Dual chamber with high-strength internal fibers; operating pressure of 15 PSI |
| Product height | 30 or 40 in. standard; custom sizes up to approximately 48 in. |
| Recommended protection height | Depending on the height and custom configuration. |
| Deployment time | Approximately 5 minutes per section; manual or electric pump |
| Fastening / connection | Compression of the upper chamber against the sides and the lower chamber against the ground |
| Compatible surfaces / supports | Concrete, asphalt, wood, travertine, and other rigid surfaces |
| Configurations / accessories | Custom-made; fills gaps up to approximately 0.3 in. |
| Reusable | Yes |
| Maintenance / storage | Portable and compact for storage |
