Garrison Sandbag
Flood protection sandbag
Traditional sandbag designed to quickly create temporary walls to hold back, contain or redirect water around buildings and infrastructure.
Recommended weight
35 to 40 lb
Size
14 × 26 in.
Reusable
Yes
Where to use Garrison Sandbag?
- Doors
- Garages
- Residential perimeters
- Roads
- Municipal facilities
- Equipment
- Embankment
- Erosion zones
- Public infrastructure
In 4 steps
How it works
The bag is partially filled with sand, closed, then laid flat. The bags are stacked in a staggered pattern to create a heavy, stable wall. The fabric allows a small amount of water to pass through, while the sand blocks and redirects the flow.
- 01 Fill
- 02 Close
- 03 Stack
- 04 Deflect
Technical specifications
Everything you need to know about
Garrison Sandbag
Dimensions and performance may vary depending on the configuration, custom dimensions, and project requirements.
| Specification | Details |
|---|---|
| System type | Flood protection sandbag |
| Models / formats | Bag: 14 × 26 in. Filled: approximately 26 × 14 × 4 in. Recommended weight: 35 to 40 lb; maximum capacity: approximately 60 to 75 lb |
| Primary material | Polypropylene, 10 × 10 weave, 2.5% UV protection / 1,600 hours |
| Structure / design | Double-stitched bottom and integrated drawstring |
| Product height | Depending on stacking; recommended base width of two to three times the wall height. |
| Recommended protection height | Depending on the wall configuration |
| Deployment time | Manual filling and stacking; approximately 0.4 ft³ of sand per bag |
| Fastening / connection | Closed and stacked bags in a staggered pattern |
| Configurations / accessories | One cubic yard of sand fills approximately 100 bags. |
| Reusable | Yes |
| Maintenance / storage | Store in a dry place after cleaning if the bags are reused. |
